Combining physical vapor deposition structuration with dealloying for the creation of a highly efficient SERS platform

• Adrien Chauvin,
• Walter Puglisi,
• Damien Thiry,
• Cristina Satriano,
• Rony Snyders and
• Carla Bittencourt

Beilstein J. Nanotechnol. 2023, 14, 83–94, doi:10.3762/bjnano.14.10

• to the alloy thin film. Three different silver compositions were selected, namely 18, 30, and 36 atom %, and characterized by SEM/energy-dispersive X-ray spectroscopy (EDX). Figure 1 displays the SEM micrograph of the as-deposited thin films. The thin films exhibit a columnar morphology (see the

In search of cytotoxic selectivity on cancer cells with biogenically synthesized Ag/AgCl nanoparticles

• Mitzi J. Ramírez-Hernández,
• Mario Valera-Zaragoza,
• Omar Viñas-Bravo,
• Ariana A. Huerta-Heredia,
• Miguel A. Peña-Rico,
• Erick A. Juarez-Arellano,
• David Paniagua-Vega,
• Eduardo Ramírez-Vargas and
• Saúl Sánchez-Valdes

Beilstein J. Nanotechnol. 2022, 13, 1505–1519, doi:10.3762/bjnano.13.124

• -dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM) techniques were used to characterize nanoparticle development. The breast cancer cell line MCF-7 was used as a test model to study the cytotoxic behavior of Ag/AgCl nanoparticles and, as a counterpart, the nanoparticles were also

• pineapple peel extracts and their behavior on the breast cancer cell line MCF-7 is shown. Bioreactions were monitored at different temperatures. Fourier-transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), thermogravimetric analysis (TGA), X-ray diffraction (XRD), energy

Rapid and sensitive detection of box turtles using an electrochemical DNA biosensor based on a gold/graphene nanocomposite

• Abu Hashem,
• M. A. Motalib Hossain,
• Ab Rahman Marlinda,
• Mohammad Al Mamun,
• Khanom Simarani and
• Mohd Rafie Johan

Beilstein J. Nanotechnol. 2022, 13, 1458–1472, doi:10.3762/bjnano.13.120

• with graphene. The spectrum of Gr in Figure 2c obtained by energy dispersive X-ray spectroscopy (EDX) clearly demonstrates the presence of a high amount of carbon with a minimum amount of oxygen, indicating the purity of Gr. Figure 2d clearly shows the presence of carbon, oxygen, and AuNPs in the

Effects of focused electron beam irradiation parameters on direct nanostructure formation on Ag surfaces

• Jānis Sniķeris,
• Vjačeslavs Gerbreders,
• Andrejs Bulanovs and
• Ēriks Sļedevskis

Beilstein J. Nanotechnol. 2022, 13, 1004–1010, doi:10.3762/bjnano.13.87

• material greatly affects the growth rate of the nanowires, with the Cu surface providing the fastest growth. Energy-dispersive X-ray spectroscopy (EDX) revealed the presence of both carbon and substrate materials in the nanowires. The effect of substrate material on nanowire growth rate could be attributed

Sodium doping in brookite TiO₂ enhances its photocatalytic activity

• Boxiang Zhuang,
• Honglong Shi,
• Honglei Zhang and
• Zeqian Zhang

Beilstein J. Nanotechnol. 2022, 13, 599–609, doi:10.3762/bjnano.13.52

• ). (1) Brookite—platy grains. Energy-dispersive X-ray spectroscopy (EDX) results of platy grains (Figure 4b) indicate that Na can be well identified besides Ti and O (note that the characteristic peak of C comes from the carbon conducting resin, Al from the sample holder, and Si from the silicon wafer

Enhancement of the piezoelectric coefficient in PVDF-TrFe/CoFe₂O₄ nanocomposites through DC magnetic poling

• Marco Fortunato,
• Alessio Tamburrano,
• Maria Paola Bracciale,
• Maria Laura Santarelli and
• Maria Sabrina Sarto

Beilstein J. Nanotechnol. 2021, 12, 1262–1270, doi:10.3762/bjnano.12.93

•  6b,c shows the aggregation of CoFe2O4 nanoparticles in some areas, in analogy with what has been reported in [25]. The formation of aggregates was confirmed by energy-dispersive X-ray spectroscopy (EDX). In correspondence with the agglomeration we observed a higher intensity of the O, Fe, and Co

The effect of cobalt on morphology, structure, and ORR activity of electrospun carbon fibre mats in aqueous alkaline environments

• Markus Gehring,
• Tobias Kutsch,
• Osmane Camara,
• Alexandre Merlen,
• Hermann Tempel,
• Hans Kungl and
• Rüdiger-A. Eichel

Beilstein J. Nanotechnol. 2021, 12, 1173–1186, doi:10.3762/bjnano.12.87

• electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, elemental analysis, and inductively coupled plasma optical emission spectrometry (ICP-OES). In addition, the fibres were analysed in terms of their

Fate and transformation of silver nanoparticles in different biological conditions

• Barbara Pem,
• Marija Ćurlin,
• Darija Domazet Jurašin,
• Valerije Vrček,
• Rinea Barbir,
• Vedran Micek,
• Raluca M. Fratila,
• Jesus M. de la Fuente and
• Ivana Vinković Vrček

Beilstein J. Nanotechnol. 2021, 12, 665–679, doi:10.3762/bjnano.12.53

• TEM data revealed quite interesting results. Incubation of AgNO3 in the liver and brain homogenates led to the formation of small AgNPs as presented in Figure 4d and Figure 4e, which was confirmed by energy-dispersive X-ray spectroscopy (EDX) (Figure 4f and Figure 4g). Transformation of different

On the stability of microwave-fabricated SERS substrates – chemical and morphological considerations

• Limin Wang,
• Aisha Adebola Womiloju,
• Christiane Höppener,
• Ulrich S. Schubert and
• Stephanie Hoeppener

Beilstein J. Nanotechnol. 2021, 12, 541–551, doi:10.3762/bjnano.12.44

• nanoparticles when they are subjected to chloride-containing biological media [34]. The generation of AgCl leads, for example, to a partial passivation of the silver surface for further reactions. Energy-dispersive X-ray spectroscopy (EDX) was used to confirm the presence of chloride on the Ag SERS substrates

Boosting of photocatalytic hydrogen evolution via chlorine doping of polymeric carbon nitride

• Malgorzata Aleksandrzak,
• Michalina Kijaczko,
• Wojciech Kukulka,
• Daria Baranowska,
• Martyna Baca,
• Beata Zielinska and
• Ewa Mijowska

Beilstein J. Nanotechnol. 2021, 12, 473–484, doi:10.3762/bjnano.12.38

• energy-dispersive X-ray spectroscopy (EDX) elemental mappings of N, C, O, and Cl in Cl-PCN (f). AFM images and height profile of PCN (a, b) and Cl-PCN (c, d). (a) FTIR spectra and (b) XRD patterns of PCN and Cl-PCN. C 1s and N 1s XPS spectra of polymeric carbon nitride (a, b) and Cl-PCN (c, d). Structure

Self-standing heterostructured NiC_x-NiFe-NC/biochar as a highly efficient cathode for lithium–oxygen batteries

• Shengyu Jing,
• Xu Gong,
• Shan Ji,
• Linhui Jia,
• Bruno G. Pollet,
• Sheng Yan and
• Huagen Liang

Beilstein J. Nanotechnol. 2020, 11, 1809–1821, doi:10.3762/bjnano.11.163

• energy-dispersive X-ray spectroscopy (EDX) were carried out on a FEI Tecnia G2 F20 high-resolution transmission electron microscope operating at 200 kV. The surface composition of the samples was analyzed by X-ray photoelectron spectroscopy (XPS) on a ESCALAB 250Xi electron energy spectrometer using Al

Electron beam-induced deposition of platinum from Pt(CO)₂Cl₂ and Pt(CO)₂Br₂

• Aya Mahgoub,
• Hang Lu,
• Rachel M. Thorman,
• Konstantin Preradovic,
• Titel Jurca,
• Lisa McElwee-White,
• Howard Fairbrother and
• Cornelis W. Hagen

Beilstein J. Nanotechnol. 2020, 11, 1789–1800, doi:10.3762/bjnano.11.161

• determined using energy-dispersive X-ray spectroscopy (EDX) and compared to the composition of deposits from MeCpPtMe3, as well as deposits made in an ultrahigh-vacuum (UHV) environment. A slight increase in metal content and a higher growth rate are achieved in the SEM for deposits from Pt(CO)2Cl2 compared

• -dispersive X-ray spectroscopy (EDX); focused electron beam-induced deposition (FEBID); nanofabrication; platinum precursors; scanning electron microscopy (SEM); thermogravimetric analysis (TGA); Introduction Focused electron beam-induced deposition (FEBID) is a direct-write nanopatterning technique. FEBID

• deposits contained halogen species and little or no carbon, while the SEM deposits contained only small amounts of halogen species but high carbon content. Results from this study highlight the effect that deposition conditions can have on the composition of deposits created by FEBID. Keywords: energy

High-responsivity hybrid α-Ag₂S/Si photodetector prepared by pulsed laser ablation in liquid

• Raid A. Ismail,
• Hanan A. Rawdhan and
• Duha S. Ahmed

Beilstein J. Nanotechnol. 2020, 11, 1596–1607, doi:10.3762/bjnano.11.142

• (SEM), energy-dispersive X-ray spectroscopy (EDX), and UV–vis spectroscopy. The optical absorption decreased and the optical energy gap of α-Ag2S increased from 1.5 to 2 eV after the CTAB surfactant was added to the Tu solution. XRD studies revealed that the synthesized Ag2S NPs were polycrystalline

Ultrasensitive detection of cadmium ions using a microcantilever-based piezoresistive sensor for groundwater

• Dinesh Rotake,
• Anand Darji and
• Nitin Kale

Beilstein J. Nanotechnol. 2020, 11, 1242–1253, doi:10.3762/bjnano.11.108

• capture Cd(II) at the picomolar level and the verification of the experimental results using energy-dispersive X-ray spectroscopy (EDX). Fabrication and Calibration of the Piezoresistive Device Previously, a polysilicon-based piezoresistive sensor was fabricated using a standard microfabrication process

Straightforward synthesis of gold nanoparticles by adding water to an engineered small dendrimer

• Sébastien Gottis,
• Régis Laurent,
• Vincent Collière and
• Anne-Marie Caminade

Beilstein J. Nanotechnol. 2020, 11, 1110–1118, doi:10.3762/bjnano.11.95

• when the powdered form of this dendrimer was dissolved in water, as shown by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX) analyses. The dendrimers acted simultaneously as mild reducers and as nanoreactors, favoring the self-assembly of gold atoms and promoting

• -controlled nanoparticles (triangles and associated triangles) in an unprecedented way. Characterization of gold nanoparticles by energy-dispersive X-ray spectroscopy In order to determine the presence and location of the different elements energy-dispersive X-ray spectroscopy (EDX) analysis was also

Synthesis of amorphous and graphitized porous nitrogen-doped carbon spheres as oxygen reduction reaction catalysts

• Maximilian Wassner,
• Markus Eckardt,
• Andreas Reyer,
• Thomas Diemant,
• Michael S. Elsaesser,
• R. Jürgen Behm and
• Nicola Hüsing

Beilstein J. Nanotechnol. 2020, 11, 1–15, doi:10.3762/bjnano.11.1

• particles are observed for the graphitized samples via energy dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS). However, we cannot fully exclude small amounts of residual iron in the graphitized catalysts below the detection limit of XPS (about 0.2 atom %) and EDX (about 0.1 wt

• Scanning electron microscopy (SEM) images were recorded with a field-emission scanning electron microscope (FE-SEM, Zeiss Ultra Plus) at 10 to 12 keV beam energy. For imaging, the samples were deposited on a conducting carbon film. Energy-dispersive X-ray spectroscopy (EDX) measurements were performed on

Label-free highly sensitive probe detection with novel hierarchical SERS substrates fabricated by nanoindentation and chemical reaction methods

• Jingran Zhang,
• Tianqi Jia,
• Yongda Yan,
• Li Wang,
• Peng Miao,
• Yimin Han,
• Xinming Zhang,
• Guangfeng Shi,
• Yanquan Geng,
• Zhankun Weng,
• Daniel Laipple and
• Zuobin Wang

Beilstein J. Nanotechnol. 2019, 10, 2483–2496, doi:10.3762/bjnano.10.239

• -up regions of cavities as shown in Figure 1d. Elemental analysis of the arrayed pyramidal cavities The parameters of the feeds (fx, fy) for fabricating micro/nanostructures using the method presented are shown in Table 1. Figure 3 shows SEM and energy-dispersive X-ray spectroscopy (EDX) images of the

Semitransparent Sb₂S₃ thin film solar cells by ultrasonic spray pyrolysis for use in solar windows

• Jako S. Eensalu,
• Atanas Katerski,
• Erki Kärber,
• Lothar Weinhardt,
• Monika Blum,
• Clemens Heske,
• Wanli Yang,
• Ilona Oja Acik and
• Malle Krunks

Beilstein J. Nanotechnol. 2019, 10, 2396–2409, doi:10.3762/bjnano.10.230

• detected, which is an expected result when crystalline Sb2S3 is formed [28][46][49]. No traces of additional phases were detected by either XRD or Raman in any glass/ITO/TiO2/Sb2S3 samples. Chlorine, which could originate from the SbCl3 precursor, was not detected by energy-dispersive X-ray spectroscopy

• (EDX) in any sample. Furthermore, the atomic ratio of S to Sb in the annealed Sb2S3 layers was close to the stoichiometric value of 1.5, as estimated using EDX (Figure S1 in Supporting Information File 1). Soft X-ray emission spectroscopy (XES) is an element- and site-specific method that allows for

Use of data processing for rapid detection of the prostate-specific antigen biomarker using immunomagnetic sandwich-type sensors

• Camila A. Proença,
• Tayane A. Freitas,
• Thaísa A. Baldo,
• Elsa M. Materón,
• Flávio M. Shimizu,
• Gabriella R. Ferreira,
• Frederico L. F. Soares,
• Ronaldo C. Faria and
• Osvaldo N. Oliveira Jr.

Beilstein J. Nanotechnol. 2019, 10, 2171–2181, doi:10.3762/bjnano.10.210

• spectroscopy (FTIR), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), and polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS, Figure S1) is described. The Silhouette coefficients calculated for IDMAP, Sammon’s mapping (SM), principal

Synthesis of highly active ETS-10-based titanosilicate for heterogeneously catalyzed transesterification of triglycerides

• Muhammad A. Zaheer,
• David Poppitz,
• Khavar Feyzullayeva,
• Marianne Wenzel,
• Jörg Matysik,
• Radomir Ljupkovic,
• Aleksandra Zarubica,
• Alexander A. Karavaev,
• Andreas Pöppl,
• Roger Gläser and
• Muslim Dvoyashkin

Beilstein J. Nanotechnol. 2019, 10, 2039–2061, doi:10.3762/bjnano.10.200

Synthesis of nickel/gallium nanoalloys using a dual-source approach in 1-alkyl-3-methylimidazole ionic liquids

• Ilka Simon,
• Julius Hornung,
• Juri Barthel,
• Jörg Thomas,
• Maik Finze,
• Roland A. Fischer and
• Christoph Janiak

Beilstein J. Nanotechnol. 2019, 10, 1754–1767, doi:10.3762/bjnano.10.171

• accelerating voltage [79] or with a Philips CM20 operated at 200 kV accelerating voltage. Conventional TEM images were recorded with a Gatan UltraScan 1000P detector. Energy-dispersive X-ray spectroscopy. EDX spectra for elemental (metal) analysis were recorded using an exposure time of 3 min. High-angle

Direct observation of oxygen-vacancy formation and structural changes in Bi₂WO₆ nanoflakes induced by electron irradiation

• Hong-long Shi,
• Bin Zou,
• Zi-an Li,
• Min-ting Luo and
• Wen-zhong Wang

Beilstein J. Nanotechnol. 2019, 10, 1434–1442, doi:10.3762/bjnano.10.141

• = 1.5406 Å). Morphological analyses were carried out on a field-emission scanning electron microscope (SEM, Hitachi S-4800) equipped with an energy-dispersive X-ray spectroscopy (EDX) detector operating at 10 kV and 10 μA. Selected-area electron diffraction (SAED) and high-resolution transmission electron

The effect of magneto-crystalline anisotropy on the properties of hard and soft magnetic ferrite nanoparticles

• Hajar Jalili,
• Bagher Aslibeiki,
• Ali Ghotbi Varzaneh and
• Volodymyr A. Chernenko

Beilstein J. Nanotechnol. 2019, 10, 1348–1359, doi:10.3762/bjnano.10.133

• magnetic interactions are discussed in more detail in the following sections. The qualitative chemical composition of the samples was investigated by using energy-dispersive X-ray spectroscopy (EDX). Figure 4 shows the EDX spectra for the samples with x = 0.2, 0.6 and 1. The EDX spectra confirm the

Alloyed Pt₃M (M = Co, Ni) nanoparticles supported on S- and N-doped carbon nanotubes for the oxygen reduction reaction

• Stéphane Louisia,
• Yohann R. J. Thomas,
• Pierre Lecante,
• Marie Heitzmann,
• M. Rosa Axet,
• Pierre-André Jacques and
• Philippe Serp

Beilstein J. Nanotechnol. 2019, 10, 1251–1269, doi:10.3762/bjnano.10.125

• Co islands (Supporting Information File 1, Figure S7a,b) were identified using the scanning transmission electron microscopy/high-angle annular dark-field imaging (STEM-HAADF) technique. Energy-dispersive X-ray spectroscopy (EDX) analysis on the N-CNT surface or in the Co aggregates confirmed the

Porous N- and S-doped carbon–carbon composite electrodes by soft-templating for redox flow batteries

• Maike Schnucklake,
• László Eifert,
• Jonathan Schneider,
• Roswitha Zeis and
• Christina Roth

Beilstein J. Nanotechnol. 2019, 10, 1131–1139, doi:10.3762/bjnano.10.113

• -dispersive X-ray spectroscopy (EDX) analyses were performed with an X-Max 50 silicon drift detector (Oxford Instruments) at an acceleration voltage of 10 kV. Nitrogen adsorption and desorption isotherms were recorded at 77 K using a high-resolution Micromeritics 3Flex instrument. Prior to the measurement the

• Supra 55VP, Carl Zeiss SMT Ltd.) with an acceleration voltage of 5–10 kV and an in-lens detector was utilized to obtain details of the surface structure. High-resolution images (Figure 2) were captured at several magnifications to investigate features at the microscale and the nanoscale. Energy